Polypropylene Flow Indicator Valve
on Jul 15, 2015Specifications :
CONSTRUCTION – Two Piece Design. Borossil Glass.
END CONNECTIONS – Flanged End as per DIN Std.
BS 10 (Table D/E/F)
ANSI B 16.5 (ASA 150 #)
Manufacturing Standards – As per Manufacturer’s Standards.
Available M.O.C – PP ( Polypropylene).
Available Size – ½” to 6”.
Dimensions :
Size (MM) Size (Inches) OD D1 L T 15 1/2" 100 13.5 175 13 20 3/4" 101 19 177 14.5 25 1" 120 24.5 200 20 40 1 1/2" 140 38
202 22 50 2" 163 50 214 22.5 65 2 1/2" 182 63.5 247 23.5 80 3" 200 75 261 27.5 100 4" 228 100 290 30 150 6" 305 150 403 34
List of Materials :
No. Description Material Quantity 1 Side Piece / Connector PP 02 2 Glass Tube Borossilicate 01 3 Crescent Ring PTFE 02 4 Stud M.S. / S.S. 361 P.P. Coated REQ. 5 Nut & Washer M.S. / S.S. REQ. 6 Nut Cap PP REQ.
Hydraulic Test Pressure.
BODY - 150 PSI.
SEAT - 100 PSI.
WORKING TEMP UP TO 80º C
Note :
- All Dimension are in ± 2 mm
- Maximum Working Pressure 10kg/cm2
- Hydraulic Test Pressure
- Table D/E/F/ASA 150 # DIN etc.